Tap water for aquariums, city by city
Tap water in Austin, Denver and New York City is safe for fish once you treat it with a water conditioner (Austin and Denver use chloramine, so check that the label covers it). Hardness and pH differ from city to city, so the fish that suit each one differ too. Every number below comes from the city’s water utility.
Edited by Marin Hale · Every value is quoted on the city’s page · Research is AI-assisted
Cities
| City | Treat for | Hardness | pH | Hardness suits |
|---|---|---|---|---|
| Austin | Chloramine | usually moderately hard (average 93 ppm; 70–126 ppm through the year) | about 9.6–9.8 (above our fish’s ranges) | 13 of 24 species |
| Denver | Chloramine | usually moderately hard (average 105 ppm; 55–124 ppm through the year) | about 8.8 (above our fish’s ranges) | 13 of 24 species |
| New York City | Chlorine | usually soft (average 32 ppm; 18–100 ppm through the year) | about 7.3 | 7 of 24 species |
“Hardness suits”: the fish and invertebrates whose hardness range covers everything the utility delivers. Each city’s page lists them, the ones that fit only some of the time, and what the pH means. Hardness is in ppm, the same as mg/L.
Your city isn’t listed?
Find your water utility’s yearly water quality report. Look for whether it uses chlorine or chloramine, for total hardness in ppm or mg/L (as calcium carbonate), and for pH, then compare them with the ranges on each species page. A GH test from the setup checklist tells you what your own tap gives.